SMC Networks TigerAccess SMC7816M - Manual (Page 463)

S
YSTEM
S
TATUS
C
OMMANDS
20-3
System Status Commands
This section describes commands used to display system information.
show startup-config
This command displays the configuration file stored in non-volatile
memory that is used to start up the system.
Command Mode
Privileged Exec
Command Usage
Use this command in conjunction with the show running-config
command to compare the information in running memory to the
information stored in non-volatile memory.
Table 20-3 System Status Commands
Command Function Mode Page
show
startup-config Displays the contents of the configuration file
(stored in flash memory) that is used to start
up the system PE 20-3
show
running-config Displays the configuration data currently in
use PE 20-6
show system Displays system information NE,
PE 20-8
show users Shows all active console and Telnet sessions,
including user name, idle time, and IP address
of Telnet clients NE,
PE 20-9
show version Displays version information for the system NE,
PE
20-10
show bme version Displays version information for VDSL chip,
BME, AFE, and IFE
PE 20-10
show cpu
utilization Shows CPU utilization parameters NE,
PE 20-11
show memory
status Shows memory utilization parameters NE,
PE 20-12