Assigning static multicast groups to interfaces, 30 assigning static multicast groups to interfaces – SMC Networks TigerAccess SMC7816M User Manual
Page 426
M
ULTICAST
F
ILTERING
16-30
Assigning Static Multicast Groups to Interfaces
For multicast streams that will run for a long term and be associated with a
stable set of hosts, you can statically bind the multicast group to the
participating interfaces.
Command Usage
• Any multicast groups that use the MVR VLAN must be statically
assigned to it under the MVR Configuration menu (see “Configuring
Global MVR Settings” on page 16-21).
• The IP address range from 224.0.0.0 to 239.255.255.255 is used for
multicast streams. MVR group addresses cannot fall within the reserved
IP multicast address range of 224.0.0.x.
Command Attributes
• MVR Domain – An independent multicast domain.
(Range: 1-3; Default: 1)
• Interface – Indicates a port or trunk.
• Member – Shows the IP addresses for MVR multicast groups which
have been statically assigned to the selected interface.
• Non-Member – Shows the IP addresses for all MVR multicast groups
which have not been statically assigned to the selected interface.