SMC Networks TigerAccess SMC7816M - Manual (Page 130)

S
IMPLE
N
ETWORK
M
ANAGEMENT
P
ROTOCOL
5-8
• Trap Inform – Notifications are sent as inform messages. Note that this
option is only available for version 2c and 3 hosts. (Default: traps are
used)
- Timeout – The number of seconds to wait for an acknowledgment
before resending an inform message. (Range: 0-2147483647
centiseconds; Default: 1500 centiseconds)
- Retry times – The maximum number of times to resend an inform
message if the recipient does not acknowledge receipt. (Range: 0-255;
Default: 3)
• Enable Authentication Traps 4 – Issues a notification message to
specified IP trap managers whenever authentication of an SNMP request
fails. (Default: Enabled)
• Enable Link-up and Link-down Traps 4 – Issues a notification
message whenever a port link is established or broken.
(Default: Enabled)
4. These are legacy notifications and therefore when used for SNMP Version 3 hosts, they must
be enabled in conjunction with the corresponding entries in the Notification View
(page 5-18).