SMC Networks TigerAccess SMC7816M - Manual (Page 659)

SHOW INTERFACES SWITCHPORT
25-17
Table 25-2 show interfaces switchport - display description
Field Description
Broadcast threshold Shows if broadcast storm suppression is enabled or
disabled; if enabled it also shows the threshold level
(page 25-11).
LACP status Shows if Link Aggregation Control Protocol has been
enabled or disabled (page 26-4).
Ingress/Egress rate
limit Shows if rate limiting is enabled, and the current rate limit
(page 28-2).
VLAN membership
mode Indicates membership mode as Trunk or Hybrid
(page 32-10).
Ingress rule Shows if ingress filtering is enabled or disabled
(page 32-12).
Acceptable frame
type Shows if acceptable VLAN frames include all types or
tagged frames only (page 32-11).
Native VLAN Indicates the default Port VLAN ID (page 32-13).
Priority for untagged
traffic Indicates the default priority for untagged frames
(page 33-17).
GVRP status Shows if GARP VLAN Registration Protocol is enabled or
disabled (page 32-4).
Allowed VLAN Shows the VLANs this interface has joined, where “(u)”
indicates untagged and “(t)” indicates tagged (page 32-14).
Forbidden VLAN Shows the VLANs this interface can not dynamically join
via GVRP (page 32-15).