SMC Networks TigerAccess SMC7816M - Manual (Page 734)

VDSL C
OMMANDS
29-52
alarm-profile
This command enters VDSL Alarm Profile configuration mode. Use the
no form to delete an alarm profile.
Syntax
[no] alarm-profile profile-name
profile-name – Name of the profile. (Range: 1-31 alphanumeric
characters)
Command Mode
Global Configuration
Command Usage
All commands entered in this mode are stored under the named profile,
and take effect only when this profile is applied to a set of VDSL ports.
Example
The following creates a VDSL alarm profile named southport.
Related Commands
show lre alarm-profile (29-78)
lre alarm-profile
This command applies a line profile to selected VDSL ports. Use the no
form to restore the default settings for the selected ports.
Syntax
[no] lre alarm-profile profile-name
profile-name – Name of the profile. (Range: 1-31 alphanumeric
characters)
Command Mode
Global Configuration
Interface Configuration (VDSL Port)
Console(config)#alarm-profile southport
Console(config-alarm-profile)#