SMC Networks TigerAccess SMC7816M - Manual (Page 78)

C
ONFIGURING THE
S
WITCH
3-10
Spanning Tree 12-1
STA
Information Displays STA values used for the bridge 12-4
Configuration Configures global bridge settings for STP, RSTP and
MSTP 12-8
Port Information Displays individual port settings for STA 12-13
Trunk Information Displays individual trunk settings for STA 12-13
Port Configuration Configures individual port settings for STA 12-18
Trunk Configuration Configures individual trunk settings for STA 12-18
MSTP
VLAN Configuration Configures priority and VLANs for a spanning tree
instance
12-22
Port Information Displays port settings for a specified MST instance 12-25
Trunk Information Displays trunk settings for a specified MST instance 12-25
Port Configuration Configures port settings for a specified MST instance 12-27
Trunk Configuration Configures trunk settings for a specified MST
instance 12-27
VLAN 13-1
System Mode Configure the switch to operate in normal mode or
one of the tunneling modes (QinQ or VLAN Swap) 13-1
802.1Q VLAN 13-2
GVRP Status Enables GVRP VLAN registration protocol 13-6
Basic Information Displays information on the VLAN type supported
by this switch 13-7
Current Table Shows the current port members of each VLAN and
whether or not the port is tagged or untagged 13-8
Static List Used to create or remove VLAN groups 13-10
Static Table Modifies the settings for an existing VLAN 13-12
Table 3-2 Switch Main Menu (Continued)
Menu Description Page