Juniper Networks MX480 - Manual (Page 92)

6. Insert the two screws at the top of the bracket and tighten each partially.
Two screws are needed for mounting the bracket on the center of the chassis. You
do not need the third screw.
7. Tighten the two screws completely.
8. Repeat the procedure for the other bracket.
Related
Documentation
• Installing the MX480 Router Using a Mechanical Lift on page 74
• Tools Required to Install the MX480 Router Without a Mechanical Lift on page 83
Copyright © 2013, Juniper Networks, Inc. 68
MX480 3D Universal Edge Router Hardware Guide