Maintaining mx480 pics – Juniper Networks MX480 User Manual
Page 158
Slot 3 Online MPC Type 2 3D EQ
PIC 0 Online 1x 10GE XFP
PIC 1 Online 1x 10GE XFP
Slot 4 Online MPC 3D 16x 10GE
PIC 0 Online 4x 10GE(LAN) SFP+
PIC 1 Online 4x 10GE(LAN) SFP+
PIC 2 Online 4x 10GE(LAN) SFP+
PIC 3 Online 4x 10GE(LAN) SFP+
NOTE:
An FPC takes up two DPC slots when installed on an MX Series
router. The slot number corresponds to the lowest numbered DPC slot.
For further description of the output from the command, see the Junos OS Operational
Mode Commands.
Related
Documentation
MX480 Flexible PIC Concentrator (FPC) LEDs on page 18
•
•
Replacing an MX480 FPC on page 194
•
Holding an MX480 FPC on page 144
•
Storing an MX480 FPC on page 146
•
Troubleshooting the MX480 FPCs on page 154
Maintaining MX480 PICs
Purpose
For optimum router performance, verify the condition of the PICs.
Action
On a regular basis:
•
Check the LEDs on PIC faceplates. The meaning of the LED states differs for various
PICs. For more information, see the
If the FPC that houses the PIC detects a PIC failure, the FPC generates an alarm
message to be sent to the Routing Engine.
•
Issue the CLI
show chassis fpc pic-status
command. The PIC slots in an FPC are
numbered from
0
through
1
, left to right:
user@host>
show chassis fpc pic-status
Slot 0 Online DPC 40x 1GE R
PIC 0 Online 10x 1GE(LAN)
PIC 1 Online 10x 1GE(LAN)
PIC 2 Online 10x 1GE(LAN)
PIC 3 Online 10x 1GE(LAN)
Slot 1 Online MX FPC Type 3
PIC 0 Online 1x OC-192 SONET
PIC 1 Online 1x OC-192 SONET
Slot 2 Online MS-DPC
PIC 0 Online MS-DPC PIC
PIC 1 Online MS-DPC PIC
Slot 3 Online MPC Type 2 3D EQ
PIC 0 Online 1x 10GE XFP
PIC 1 Online 1x 10GE XFP
Copyright © 2013, Juniper Networks, Inc.
134
MX480 3D Universal Edge Router Hardware Guide