Juniper Networks MX480 - Manual (Page 246)

The normal functioning status LED confirms that the AS MXC is online. You can also
verify correct AS MXC functioning by issuing the
show chassis fpc pic-status command.
Figure 116: Installing an AS MXC
g006676
Related
Documentation
Preventing Electrostatic Discharge Damage to an MX480 Router on page 248 •
• Replacing an MX480 AS MLC on page 214
• MX480 Application Services Modular Processing Card Description on page 24
Replacing a Cable on an MX480 DPC, MPC, MIC, or PIC
1. Removing a Cable on an MX480 DPC, MPC, MIC, or PIC on page 222
2. Installing a Cable on an MX480 DPC, MPC, MIC, or PIC on page 224
Removing a Cable on an MX480 DPC, MPC, MIC, or PIC
Removing and installing cables on a DPC, MPC, MIC, or PIC does not affect router function.
To remove a cable:
1. Have ready a rubber safety cap for each fiber-optic cable and transceiver.
2. If removing all cables connected to the component, use one of the following methods
to take the component offline:
Copyright © 2013, Juniper Networks, Inc. 222
MX480 3D Universal Edge Router Hardware Guide