Juniper Networks MX480 - Manual (Page 292)

Advarsel Før det utføres arbeid på kabinettet eller det arbeides i nærheten
av strømforsyningsenheter, skal strømledningen trekkes ut p
vekselstrømsenheter og strømmen kobles fra ved strømbryteren på
likestrømsenheter.
Aviso Antes de trabalhar num chassis, ou antes de trabalhar perto de unidades
de fornecimento de energia, desligue o cabo de alimentação nas unidades
de corrente alternada; desligue a corrente no disjuntor nas unidades de
corrente contínua.
¡Atención! Antes de manipular el chasis de un equipo o trabajar cerca de una
fuente de alimentación, desenchufar el cable de alimentación en los equipos
de corriente alterna (CA); cortar la alimentación desde el interruptor
automático en los equipos de corriente continua (CC).
Varning! Innan du arbetar med ett chassi eller nära strömförsörjningsenheter
skall du för växelströmsenheter dra ur nätsladden och för likströmsenheter
bryta strömmen vid överspänningsskyddet.
Related
Documentation
DC Power Electrical Safety Warnings for Juniper Networks Devices on page 272 •
In Case of an Electrical Accident
If an electrical accident results in an injury, take the following actions in this order:
1. Use caution. Be aware of potentially hazardous conditions that could cause further
injury.
2. Disconnect power from the router.
3. If possible, send another person to get medical aid. Otherwise, assess the condition
of the victim, then call for help.
Related
Documentation
General Safety Warnings for Juniper Networks Devices on page 246 •
• General Electrical Safety Warnings for Juniper Networks Devices on page 264
General Electrical Safety Guidelines and Warnings Electrical Codes for M Series, MX Series,
and T Series Routers
• Install the router in compliance with the following local, national, or international
electrical codes:
• United States—National Fire Protection Association (NFPA 70), United States
National Electrical Code.
• Canada—Canadian Electrical Code, Part 1, CSA C22.1.
Copyright © 2013, Juniper Networks, Inc. 268
MX480 3D Universal Edge Router Hardware Guide