Juniper Networks MX480 - Manual (Page 85)

CHAPTER 5
Unpacking the MX480 Router
• Tools and Parts Required to Unpack the MX480 Router on page 61
• Unpacking the MX480 Router on page 61
• Verifying the MX480 Router Parts Received on page 63
Tools and Parts Required to Unpack the MX480 Router
To unpack the router and prepare for installation, you need the following tools:
• Phillips (+) screwdriver, number 2
• 1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
• Blank panels to cover any slots not occupied by a component
Related
Documentation
Unpacking the MX480 Router on page 61 •
• Verifying the MX480 Router Parts Received on page 63
Unpacking the MX480 Router
The router is shipped in a wooden crate. A wooden pallet forms the base of the crate.
The router chassis is bolted to this pallet. Quick Start installation instructions and a
cardboard accessory box are also included in the shipping crate.
The shipping container measures 25.0 in. (63.5 cm) high, 28 in. (71.1 cm) wide, and
33.5 in. (85.0 cm) deep. The total weight of the container containing the router and
accessories can range from 153 lb (70 kg) to 351 lb (159.2 kg).
NOTE: The router is maximally protected inside the shipping crate. Do not
unpack it until you are ready to begin installation.
61 Copyright © 2013, Juniper Networks, Inc.