Juniper Networks MX480 - Manual (Page 338)

RJ-45 Connector Pinouts for MX Series Routing Engine AUX and CONSOLE Ports
The ports on the Routing Engine labeled AUX and CONSOLE are asynchronous serial
interfaces that accept an RJ-45 connector. The ports connect the Routing Engine to an
auxiliary or console management device.
Table 47 on page 314 describes the RJ-45
connector pinout.
Table 47: RJ-45 Connector Pinout for the AUX and CONSOLE Ports
Description Signal Pin
Request to Send RTS 1
Data Terminal Ready DTR 2
Transmit Data TXD 3
Signal Ground Ground 4
Signal Ground Ground 5
Receive Data RXD 6
Data Set Ready DSR/DCD 7
Clear to Send CTS 8
Related
Documentation
• MX480 Routing Engine Description on page 32
• RJ-45 Connector Pinouts for an MX Series Routing Engine ETHERNET Port on page 313
Copyright © 2013, Juniper Networks, Inc. 314
MX480 3D Universal Edge Router Hardware Guide