Figure 9 on, Fpc3 mx-fpc2 – Juniper Networks MX480 User Manual
Page 41
Figure 9: FPC Installed in the MX480 Router Chassis
OK
MASTER
FAN
ONLINE
OFFLINE
0
1
1
0
FAIL
FAIL
PEM
FAIL
FAIL
FAIL
FAIL
FAIL
FAIL
ESD
OK
OK
OK
OK
OK
OK
OK
2
3
4
5
ACO/LT
YELLOWALARM
REDALARM
NC
NO
C
NC
NO
C
MX480
REO
RE1
0 1 2 3
g0044
14
shows the typical FPCs supported on the MX480 router.
Figure 10: Typical FPCs Supported on the MX480 Router
g0044
17
DPCE-X-Q-40GE
DPCE-X-Q-40GE
FPC3
MX-FPC2
MX-FPC2
If a slot is not occupied by a DPC, an FPC, or an SCB, a blank panel must be installed to
shield the empty slot and to allow cooling air to circulate properly through the router.
Each FPC supports up to two PICs. On an FPC2, one Packet Forwarding Engine receives
incoming packets from the PICs installed on the FPC and forwards them through the
switch planes to the appropriate destination port. On an FPC3, two Packet Forwarding
17
Copyright © 2013, Juniper Networks, Inc.
Chapter 2: MX480 Hardware Components