FUJITSU ServerView Resource Orchestrator Cloud Edition V3.1.0 - Manual (Page 92)

- Server load balancer operations use rulesets
Explain the rulesets used during operation to the tenant administrator. Also explain parameters and the values to be set in the
rulesets to the tenant administrator.
- In case of L-Platform templates, a server NIC is only located if it is allocated. When defining multiple NICs, click the target server,
and then click the Add NIC button to add the required number of NICs.
The number of server NICs that can be allocated is the maximum number allowed for image information.
Information
Commands can also be used to create new L-Platform templates.
Refer to " Appendix A Using Commands to Register and Delete L-Platform Templates " for details.
8.3.3 Copying L-Platform Template
For the various types of information comprising an L-Platform template, the following information can be copied:
- Template information
- Image information
- Software information
Follow the procedure below to copy the above information:
1. On the L-Platform Template window, select the tab (Template, Image, or Software) of the information to be copied.
2. From the list, select the information to be referenced.
3. Click the Copy button.
4. The information set in the copy window is the same as the referenced information. If required, change this information.
Refer to " 8.4 Items to Set for Each Type of L-Platform Template Information " for details on the information to be set.
5. Click the Create button.
A message indicating that the template has been created is displayed and the template is created.
Point
- In case of L-Platform templates, a server NIC is only located if it is allocated. When defining multiple NICs, click the target server,
and then click the Add NIC button to add the required number of NICs.
The number of server NICs that can be allocated is the maximum number allowed for image information.
8.3.4 Editing L-Platform Template
For the various types of information comprising an L-Platform template, the following information can be edited:
- Template information
- Segment information
- Image information
- Software information
Follow the procedure below to edit the above information:
- 80 -