FUJITSU ServerView Resource Orchestrator Cloud Edition V3.1.0 - Manual (Page 114)

Note
- If it becomes impossible to connect by the admin server stop and etc. when L-Platform is being operated, the lamp in the menu becomes
gray and the message "Not Operating" is displayed. In this case, contact the system administrator. According to the displayed window
and the performed operation, an error message like the following may be displayed.
- Failed to get system configuration.
- Failed to get the access right.
- Usually, the Infrastructure Administrator cannot subscribe to L-Platform, but dual-role administrators can subscribe.
Refer to " Appendix B Applying (Subscribe) for L-Platform Usage by Dual-Role Administrators " for details.
9.2 L-Platform Management
This section explains how to use the Management page to manage L-Platforms that are in use.
The L-Platforms targeted by L-Platform management vary in accordance with the user, as follows:
- Infrastructure Administrator
All L-Platforms.
- Tenant Administrator
All L-Platforms being used by owned tenants.
- Tenant users
Only L-Platforms in use by the user.
The Management page can be used to display a list of the L-Platforms currently being used.
The following L-Platform operations can also be performed:
- L-Platform detailed information display
- Disk detailed information display
9.2.1 L-Platform Management Display Page
This section explains how to display the L-Platform management page and explains the display format.
L-Platform Management Page Display Method
From the operation menu on the L-Platform page, select Management.
L-Platform Management Page Display Format
The L-Platform management page has the following three types of display format.
Display format Description
L-Platform Management Displays the L-Platform configuration images in a list
L-Platform Management (list) Displays the L-Platform list
Server List The list displays virtual servers.
It can display all servers or inactive servers.
The buttons in the upper-left section of the page can be used to switch between the "L-Platform Management" and "Server List" display
formats.
The display can be switched between the "configuration" format and the "list" format using the button located on the top right hand side
of the page ( ).
Examples of each display format are shown below:
- 102 -