FUJITSU ServerView Resource Orchestrator Cloud Edition V3.1.0 - Manual (Page 101)

3. The component name for the patch information and the input field for the description will be displayed at the bottom of the page.
Enter the required items.
4. Click the Next button.
The Confirm page is displayed.
Explanation of Items
The following explains items in the Add Patch tab:
- Patch ID
Enter up to 32 bytes (an ASCII character string excluding <, >, &, ", and ') for the patch ID
The same patch ID cannot be set multiple times for one type of software.
The default is 'PATCH + "consecutive numbering (from 1)"'.
- Component Name
Enter up to 85 characters (excluding <, >, &, ", and ') for the name of the component to which the patch is applied
- Description
Enter up to 85 characters (excluding <, >, &, ", and ') for the patch explanation.
Change Patch Information
To change the patch information that was set:
1. From the list in the upper part of the page, select the patch information to be changed.
2. Detailed information about the selected patch information will be displayed at the bottom of the page. Change the information as
necessary.
3. Click the Next button.
The Confirm page is displayed.
Point
If the selected patch information was changed, the syntax check for the changed values will be performed automatically. If the syntax is
correct, the patch information will be changed. If a syntax error occurred, an error message will be displayed and the pre-change values
will be restored.
Delete Patch Information
The procedure to delete patch information is as follows:
1. From the list in the upper part of the page, select the patch information to be deleted.
2. Click the Delete button.
A deletion confirmation message is displayed.
3. Click the Yes button.
The patch information is deleted.
8.4.2.5 Confirm Page
Check the set image information at the Confirm page, and create, copy, or edit the image information.
- 89 -