Image information, Segment information, Template information – FUJITSU ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual
Page 157
2.
Register software information using the software information registration (cfmg_addsoft) command.
Register one piece of software information for each type of software (i.e., create different pieces of software information for each
type of software being used).
Image Information
Use the following procedure to register information for images included in the image used by the L-Platform template.
1.
Use the image list display command (cfmg_listvmimage) to check images that are already registered.
2.
Create an image information file (XML file).
Model files have been prepared for your reference.
Refer to "15.18.2 Image Information" in the "Reference Guide (Command/XML) CE" for information on the storage location for
model files and image information.
3.
Register image information with the Image information registration (cfmg_addimageinfo) command.
Segment Information
When restrictions are to be placed on the network resource to be used with this product, use the following procedure to register segment
information.
1.
Use the network resource list display command (cfmg_listvnet) to check network resources that are already registered.
Make a note of the resource ID in the
2.
Create a segment information file (XML file).
Use the resource ID noted in step 1 for the
Refer to "15.18.3 Segment Information" in the "Reference Guide (Command/XML) CE" for information on segment information.
3.
Register segment information with the Segment registration (cfmg_addnetinfo) command.
Note
-
If segment information has not been registered, all registered network resources are targeted for deployment. If "Automatic" is specified
for deployment destination network resources, the deployment destination is selected from all network resources.
-
If segment information is registered, register segment information for all network resources used by the L-Platform template.
If "Automatic" is specified for deployment destination network resources, the deployment destination is selected from the network
resources for which "Business" is specified.
Template Information
Use the following procedure to register template information.
1.
Use the following commands to check the information used in the template information.
-
Segment information: Segment list display (cfmg_listnetinfo) command
-
Image information : Image information list display (cfmg_listimageinfo) command
2.
Create a template information file (XML file).
Model files have been prepared for your reference.
Refer to "15.18.4 Template Information" in the "Reference Guide (Command/XML) CE" for information on the storage location
for model files and template information.
3.
Use the Template information registration (cfmg_addtemplate) command to register template information.
- 145 -