FUJITSU ServerView Resource Orchestrator Cloud Edition V3.1.0 - Manual (Page 135)

Note
- When Solaris Zones are being used and when one of the following applies, do not specify strings starting with "SUNW" for the
tenant name:
- When the server ID is to be used in the L-Server name as the method for setting resource names
- When the host name is to be used in the L-Server name as part of a resource naming convention, and the host name setting
for the virtual server is to use the tenant name and a serial number
- When "tenant name + serial number" is used in the host name setting of the virtual server, specify tenant names using
alphanumeric characters and hyphens. Tenant names consisting solely of numbers are not allowed.
Refer to "18.4 Setting the Host Names for Virtual Servers" in the "Setup Guide CE" for information on the host name setting for
the virtual server. Refer to "18.5 Setting the Method for Setting Resource Names" in the "Setup Guide CE" for information on
resource naming conventions.
3. Click the Confirm button.
The confirmation window is displayed.
4. Check the tenant information, and then click the Create button.
The completion window is displayed.
5. Click the Back to Tenant List button to return to the Tenant List window.
11.4 Modifying a Tenant
The Modify Tenant window can be used to modify tenant information.
Perform the following steps to modify tenant information:
1. In the Tenant List window, select the tenant to modify, and then click the Modify button.
The Modify Tenant window is displayed.
2. In the Modify Tenant window, edit the value of the item being changed.
Item Explanation
Tenant name Displays the tenant name.
The tenant name cannot be changed.
Tenant display name Specify the tenant display name. Specify a character string of up to 30
characters.
This specification is mandatory.
E-mail address Use up to 64 characters to specify the e-mail address or mailing list of the
Tenant Administrator.
Select Global Pools Selects or deselects the global pools that can be used from the tenant.
Multiple global pools can be selected, and there is no upper limit to the
number that can be selected.
Click the Select all button to select all global pools. Click the Clear all
button to remove the selected state from all global pools.
Accounting Enter information related to tenant charges.
The input area is displayed only if usage charge calculation is enabled.
Refer to "8.7.4 Usage Charge Calculator Settings" in the "Operation Guide
CE" for information about configuring the usage charge calculation
function.
Cut off date Specify the day to be used for monthly closing processing from the next
time.
Specify between "1" and "31".
- 123 -