Hitachi TAGMASTORE MK-90RD011-25 User Manual
Page 96
78
Chapter 2 Overview of CCI Operations
The command device is defined using the system raw device name (character-type device
file name). For example, the command devices for Figure 2.41 would be:
HP-UX:
HORCM_CMD of HOSTA = /dev/rdsk/c0t0d1
HORCM_CMD of HOSTB = /dev/rdsk/c1t0d1
Solaris:
HORCM_CMD of HOSTA = /dev/rdsk/c0t0d1s2
HORCM_CMD of HOSTB = /dev/rdsk/c1t0d1s2
Note: For Solaris operations with CCI version 01-09-03/04 and higher, the command
device does not need to be labeled during format command.
AIX:
HORCM_CMD of HOSTA = /dev/rhdiskXX
HORCM_CMD of HOSTB = /dev/rhdiskXX
where XX = device number assigned by AIX
Tru64 UNIX:
HORCM_CMD of HOSTA = /dev/rrzbXXc
HORCM_CMD of HOSTB = /dev/rrzbXXc
where XX = device number assigned by Tru64 UNIX
DYNIX/ptx
®
:
HORCM_CMD of HOSTA = /dev/rdsk/sdXX
HORCM_CMD of HOSTB = /dev/rdsk/sdXX
where XX = device number assigned by DYNIX/ptx
®
Windows 2008/2003/2000:
HORCM_CMD of HOSTA = \\.\CMD-Ser#-ldev#-Port#
HORCM_CMD of HOSTB = \\.\CMD-Ser#-ldev#-Port#
Windows NT:
HORCM_CMD of HOSTA = \\.\CMD-Ser#-ldev#-Port#
HORCM_CMD of HOSTB = \\.\CMD-Ser#-ldev#-Port#
Linux, zLinux:
HORCM_CMD of HOSTA = /dev/sdX
HORCM_CMD of HOSTB = /dev/sdX
where X = device number assigned by Linux, zLinux
IRIX:
HORCM_CMD for HOSTA ...
/dev/rdsk/dks0d0l1vol or
/dev/rdsk/node_wwn/lun1vol/c0p0
HORCM_CMD for HOSTB ...
/dev/rdsk/dks1d0l1vol or
/dev/rdsk/node_wwn/lun1vol/c1p0