Hitachi TAGMASTORE MK-90RD011-25 - Manual (Page 217)

Hitachi Command Control Interface (CCI) User and Reference Guide 199
Table 4.15 Truth Table for Pairvolchk Group Status Display
Status of Each Volume in the Group
Option COPY* PSUE PDUB PFUS PSUS PFUL PAIR Group Status
See
Notes
below
TRUE x x x x x x COPY*
false TRUE x x x x x PSUE
false false TRUE x x x x PDUB
false false false TRUE x x x PFUS
false false false false TRUE x x PSUS
false false false false false TRUE x PFUL
false false false false false false TRUE PAIR
-ss TRUE x x x x x x COPY*
false TRUE x x x x x PSUE
false false TRUE x x x x PDUB
false false false x x TRUE x PFUL
false false false x x false TRUE PAIR
false false false TRUE false false false PFUS
false false false false TRUE false false PSUS
*COPY = COPY or RCPY
x = true or false (does not matter).
Notes:
„
The PFUL state is displayed as PAIR by all commands (except the -fc option of the
pairdisplay command), since PFUL indicates PAIR state with sidefile at the HWM.
„
The PFUS state is displayed as PSUS by all commands (except the -fc option of the
pairdisplay command), since PFUS indicates SUSPENDED state due to sidefile full.
„
The SVOL_PSUS state is displayed as SSUS by the pairdisplay command and other
commands.
„
This option will be able to use under condition when ‘pairvolchk -s’ has
“USE_OLD_VCHK” variable.