Hitachi TAGMASTORE MK-90RD011-25 - Manual (Page 229)

Hitachi Command Control Interface (CCI) User and Reference Guide 211
4.8 Displaying Pair Status (Pairdisplay)
The pairdisplay command displays the pair status allowing you to verify completion of pair
operations (e.g., paircreate, pairresync). The pairdisplay command is also used to confirm
the configuration of the pair connection path (the physical link of paired volumes and
servers). The pairdisplay command can be used for a paired volume or a group of paired
volumes. Table 4.17 lists and describes the pairdisplay command parameters and returned
values. Figure 4.20 and Figure 4.21 show examples of the pairdisplay command and its
output. Figure 4.22 shows examples of the -m option of the pairdisplay command.
Table 4.17 Pairdisplay Command Parameters
Parameter Value
Command
name
pairdisplay
Format pairdisplay { -h ⎪ -q ⎪ -z ⎪ -g ⎪ -d ⎪ -d[g] [MU#] ⎪ -FHORC [MU#]⎪ -
FMRCF [MU#] ⎪ -d[g] [MU#] ⎪ -c ⎪ -l | -f[xcdm] | -CLI ⎪ -m ⎪ -v jnl[t] |-v ctg |-v pid
}