Hitachi TAGMASTORE MK-90RD011-25 - Manual (Page 265)

Hitachi Command Control Interface (CCI) User and Reference Guide 247
Output of the raidqvchkdsp command with -v gflag option:
„
GI-C-R-W-S: This displays the flags for guarding as for the target volume.
I Æ E: Enabled for Inquiry command.
D: Disabled for Inquiry command.
C Æ E: Enabled for Read Capacity command.
D: Disabled for Read Capacity command.
R Æ E: Enabled for Read command.
D: Disabled for Read command.
WÆ E: Enabled for Write command.
D: Disabled for Write command.
SÆ E: Enabled for becoming the SVOL.
D: Disabled for becoming the SVOL.
„
PI-C-R-W-S: This displays the permission flags that show whether each mode flag can be
changed to enable or not.
I Æ E: ”I” flag can be changed to enable.
D: ”I” flag cannot be changed to enable.
C Æ E: ”C” flag can be changed to enable.
D: ”C” flag cannot be changed to enable.
R Æ E: ”R” flag can be changed to enable.
D: ”R” flag cannot be changed to enable.
WÆ E: ”W” flag can be changed to enable.
D: ”W” flag cannot be changed to enable.
SÆ E: ”S” flag can be changed to enable.
D: ”S” flag cannot be changed to enable.
„
R-Time: This displays the retention time for write protect, in units of day. The hyphen
(-) shows that the retention time is infinite. APP will be able to know whether the target
volume is denied to change to writing enable by referring “R-Time”.
Audit lock status is shown as the retention time plus 1000000.
“R-Time + 1000000” shows the retention time with Audit lock status.
raidvchkdsp -g vg01 -v pool
Group PairVol Port# TID LU Seq# LDEV# Bsize Available Capacity
Vg01 oradb1 CL2-D 2 7 62500 167 2048 100000 1000000000
Vg01 oradb2 CL2-D 2 10 62500 170 2048 100000 1000000000
Figure 4.38 Raidvchkdsp Command Example with -v pool Option