Hitachi TAGMASTORE MK-90RD011-25 - Manual (Page 195)

Hitachi Command Control Interface (CCI) User and Reference Guide 177
Table 4.6 Specific Error Codes for Pairsplit
Category Error Code Error Message Recommended Action Value
Volume status EX_ENQVOL Unmatched volume status within the
group
Confirm status using the pairdisplay
command. Make sure all volumes in the
group have the same fence level and
volume attributes.
236
EX_INCSTG Inconsistent status in group Confirm pair status using pairdisplay. 229
EX_INVVOL Invalid volume status Confirm pair status using pairdisplay -l. 222
EX_EVOLCE Pair Volume combination error Confirm pair status using pairdisplay,
and change combination of volumes.
235
EX_INVSTP Invalid pair status Confirm pair status using pairdisplay. 228
Unrecoverable EX_EWSUSE Pair suspended at WAIT state Issue pairresync manually to the
identified failed paired volume to try to
recover it. If the trouble persists, call the
Hitachi Data Systems Support Center.
234
Note: Unrecoverable errors are fixed and will not be resolved, even after re-executing the
command. If the command failed, the detailed status will be logged in the CCI command log
($HORCC_LOG) (see Table A.2), even if the user script has no error handling.
ShadowImage Environment
pairsplit -g oradb1 -rw -FHORC
SVOL P/P
VOL
SVOL
SVOL
Ora(TrueCopy)
Oradb1(ShadowImage)
Oradb2(ShadowImage)
0
1
0
Seq#30052
Seq#30053
Figure 4.3 Example of -FHORC Option for Pairsplit
TrueCopy Environment
pairsplit -g ora -FMRCF 1
PVOL S/P
VOL
SVOL
SVOL
Ora(TrueCopy) Oradb1(ShadowImage)
Oradb2(ShadowImage)
0
1
0
Seq#30052
Seq#30053
Figure 4.4 Example of -FMRCF Option for Pairsplit