beautypg.com

Hitachi TAGMASTORE MK-90RD011-25 User Manual

Page 112

background image

94

Chapter 2 Overview of CCI Operations

„

Designate a group name and display pair status.
# pairdisplay -g oradb -m cas

Group PairVol(L/R) (Port#,TID,LU-M),Seq#,LDEV#.P/S,Status, Seq#,P-LDEV# M
oradb oradev1(L) (CL1-D , 2, 1-0)30053 268..S-VOL PAIR,----- 266 -
oradb1 oradev11(L) (CL1-D , 2, 1-1)30053 268..P-VOL PAIR,30053 270 -
oradb2 oradev21(L) (CL1-D , 2, 1-2)30053 268..SMPL ----,----- ---- -
oradb oradev1(R) (CL1-A , 1, 1-0)30053 266..P-VOL PAIR,30053 268 -
oradb oradev2(L) (CL1-D , 2, 2-0)30053 269..S-VOL PAIR,----- 267 -
oradb1 oradev12(L) (CL1-D , 2, 2-1)30053 269..P-VOL PAIR,30053 271 -
oradb2 oradev22(L) (CL1-D , 2, 2-2)30053 269..SMPL ----,----- ---- -
oradb oradev2(R) (CL1-A , 1, 2-0)30053 267..P-VOL PAIR,30053 269 -

The command device is defined using the system raw device name (character-type device
file name). The command device defined in the configuration definition file must be
established in a way to be following either every instance. If one command device is used
between different instances on the same SCSI port, then the number of instances is up to 16
per command device. If this restriction is exceeded, then use a different SCSI path for each
instance. For example, the command devices for Figure 2.45 would be:

„

HP-UX:
HORCM_CMD of HOSTA (/etc/horcm.conf) ... /dev/rdsk/c0t0d1
HORCM_CMD of HOSTB (/etc/horcm.conf) ... /dev/rdsk/c1t0d1
HORCM_CMD of HOSTB (/etc/horcm0.conf) ... /dev/rdsk/c1t0d1

„

Solaris:
HORCM_CMD of HOSTA(/etc/horcm.conf) ... /dev/rdsk/c0t0d1s2
HORCM_CMD of HOSTB(/etc/horcm.conf) ... /dev/rdsk/c1t0d1s2
HORCM_CMD of HOSTB(/etc/horcm0.conf) ... /dev/rdsk/c1t0d1s2

Note: For Solaris operations with CCI version 01-09-03/04 and higher, the command
device does not need to be labeled during format command.

„

AIX:
HORCM_CMD of HOSTA(/etc/horcm.conf) ... /dev/rhdiskXX
HORCM_CMD of HOSTB(/etc/horcm.conf) ... /dev/rhdiskXX
HORCM_CMD of HOSTB(/etc/horcm0.conf)... /dev/rhdiskXX
where XX = device number assigned by AIX

„

Tru64 UNIX:
HORCM_CMD of HOSTA(/etc/horcm.conf) ... /dev/rrzbXXc
HORCM_CMD of HOSTB(/etc/horcm.conf) ... /dev/rrzbXXc
HORCM_CMD of HOSTB(/etc/horcm0.conf)... /dev/rrzbXXc
where XX = device number assigned by Tru64 UNIX

„

DYNIX/ptx

®

:

HORCM_CMD of HOSTA(/etc/horcm.conf) ... /dev/rdsk/sdXX
HORCM_CMD of HOSTB(/etc/horcm.conf) ... /dev/rdsk/sdXX
HORCM_CMD of HOSTB(/etc/horcm0.conf)... /dev/rdsk/sdXX
where XX = device number assigned by DYNIX/ptx

®