Hitachi TAGMASTORE MK-90RD011-25 - Manual (Page 156)

138 Chapter 3 Preparing for CCI Operations
Table 3.10 Configuration (HORCM_CONF) Parameters
Parameter Default value Type Limit
ip_address None Character string 64 characters
service None Character string or numeric value 15 characters
poll (10 ms) 1000 Numeric value
See Note None
timeout (10 ms) 3000 Numeric value
See Note None
dev_name for HORCM_DEV None Character string 31 characters
dev_group None Character string 31 characters
Recommended value = 8 char. or less
port # None Character string 31 characters
target ID None Numeric value
See Note 7 characters
LU# None Numeric value
See Note
7 characters
MU# 0 Numeric value
See Note
7 characters
Serial# None Numeric value 12 characters
CU:LDEV(LDEV#) None Numeric value 6 characters
dev_name for HORCM_CMD None Character string 63 characters
Recommended value = 8 char. or less
Note: Use decimal notation for numeric values (not hexadecimal).