Hitachi TAGMASTORE MK-90RD011-25 - Manual (Page 364)

346 Chapter 5 Troubleshooting
Error Code Error Message Condition Recommended Action Value
EX_EWSTOT Timeout waiting for
specified status
Detected a time out, before it made it
to the designated status.
Please increase the value of the timeout using
the -t option.
233
EX_EWSLTO Timeout waiting for
specified status on
the local host
Timeout error because the remote
did not notify about expected status
in time.
Please confirm that HORC Manager on the
remote host is running.
232
EX_ESTMON HORCM Monitor
stopped
HORC Manager monitoring was
refused.
Please confirm the value of “poll” in the
configuration file.
231
EX_UNWCMD Unknown command An unknown command was
attempted.
Please confirm the command name. 230
EX_INCSTG Inconsistent status
in group
The pair status of a volume within a
group is not identical to the status of
the other volumes in the group.
Please confirm the pair status using the
pairdisplay command.
229
EX_INVSTP Invalid pair status The pair status of the target volume
is not appropriate.
Please confirm the pair status using the
pairdisplay command.
228
EX_INVVOL Invalid volume
status
The volume status of the target
volume is not appropriate.
Please confirm the pair status using the
pairdisplay -l command.
222
EX_INVMUN Invalid mu# with
HORC or HOMRCF
The MU# of the volume to be
operated is not appropriate.
Please confirm the MU# for the specified group
using the pairdisplay command. MU #1/2 cannot
be used for Hitachi TrueCopy, and MU #1/2 must
be P-VOL for ShadowImage.
220
EX_ENLDEV No such LDEV
within the RAID
A device defined in the configuration
file does not have a mapping to a
real LUN and target ID within the
RAID storage system.
Please confirm that the Port, Target ID, LUN are
defined correctly under HORCM_DEV in the
configuration file.
227
EX_INVRCD Invalid return code Wrong return code. Call the Hitachi Data Systems Support Center. 226
EX_VOLCUR S-Vol currency error Currency check error for S-VOL.
Cannot guarantee identical data on
S-VOL.
Check the volume list to see if an operation was
directed to the wrong S-VOL.
225
EX_VOLCUE Local volume
currency error
The volume specified with the
SVOL-takeover command is not the
same as the P-VOL.
Please confirm the pair status of the local volume. 224
EX_VOLCRE Local and remote
vol. currency error
The combination of the volumes
specified with Swap-takeover is
unsuitable.
Please confirm the pair status of remote and local
volumes using the pairdisplay command.
223
EX_UNWERR Unknown error
code.
Wrong error code. Call the Hitachi Data Systems Support Center. --
EX_ENOCTG Not enough CT
groups in the RAID
CTGID could not be registered due
to being beyond the max number of
CT groups (0-255 for USP V/VM, 0-
255 for USP/NSC, 0-127 for 9900V,
0-63 for 9900, 0-15 for 7700E) for an
async volume.
Choose an existing CTGID (use pairvolchk to
display CTGIDs). Use the ‘-f async ‘
option of the paircreate command to force the
pair into a pre-existing CTGID.
217
EX_EXTCTG Extended CT group
across RAIDs
A Hitachi TrueCopy Async or
ShadowImage volume is defined in
the configuration file
(HORCM_CONF) as a group that
extends across storage systems.
Please confirm the serial # of the volumes by
using the pairdisplay command to verify that the
CT group is contained completely within one
RAID storage system.
216