Hitachi TAGMASTORE MK-90RD011-25 - Manual (Page 222)

204 Chapter 4 Performing CCI Operations
In case of state No. 17:
This case is pair suspend (using pairsplit command) by
operator. The DC1 takes over processing from the DC2,
when the DC2 has PSUS state DC1(SVOL-PSUS) & DC2(PVOL-
PSUS) that will be needed that ask operator for decision,
and/or pairresync on the DC1 side. If the DC1 takes over
processing from the DC2 without their confirmation
operations, horctakeover command will be returned with
SVOL_E (execute SVOL-takeover and return EX_VOLCUR)
on the (DC1) side.
Æ
state is No. 17.
Host A
PVOL
PSUS
DC2
Host B
SVOL
PSUS
DC1
State No. 17
Consideration as for state No. 9
The horctakeover command will be failed with EX_ENORMT on the following nested failure
case (state No. 4Æ9). Therefore, HA Control Script will be needed that ask operator for
decision, and do nothing on the DC1 side.
Host A Host B
PVOL SVOL
DC2 DC1
Host C Host A Host
B
PVOL SMPL
DC2 DC1
Host
C
Host A Host B
P
vol
SMPL
DC2 DC1
Host
C
DC2 site failure Host B failure
State No. 16 State No. 23 Æ4
State No. 4 Ж9