Hitachi TAGMASTORE MK-90RD011-25 - Manual (Page 78)

60 Chapter 2 Overview of CCI Operations
In case of IPv4 mapped IPv6, it is possible to communicate between HORCM/IPv4 and
HORCM/IPv6 using IPv4 mapped IPv6.
Host
RM command
HORCM
IPv4
Host
RM command
HORCM
IPv6
mapped IPv6
HORCM_MON
#ip_address service poll(10ms) timeout(10ms)
NONE horcm4 1000 3000
#158.214.127.64 horcm4 1000 3000
#/********** For HORCM_CMD ****************/
HORCM_CMD
#dev_name
#UnitID 0 (Serial# 63502)
/dev/rdsk/c1t0d0s2
#/********** For HORCM_LDEV ****************/
HORCM_LDEV
#dev_group dev_name Serial# LDEV# MU#
IPM4G dev1 63502 577
#/********** For HORCM_INST ****************/
HORCM_INST
#dev_group ip_address service
IPM4G 158.214.135.105 horcm6
HORCM_MON
#ip_address service poll(10ms) timeout(10ms)
NONE6 horcm6 1000 3000
# ::ffff:158.214.135.105 horcm6 1000
3000
#/********** For HORCM_CMD ****************/
HORCM_CMD
#dev_name
#UnitID 0 (Serial# 63502)
/dev/rdsk/c1t0d0s2
#/********** For HORCM_LDEV ****************/
HORCM_LDEV
#dev_group dev_name Serial# LDEV# MU#
IPM4G dev1 63502 677
#/********** For HORCM_INST ****************/
HORCM_INST
#dev_group ip_address service
IPM4G ::ffff:158.214.127.64 horcm4
IPM4G 158.214.127.64 horcm4
” ::ffff:158.214.127.64 ” shows IPv4 mapped IPv6.
If IP_address will be specified with IPV4 format, then
HORCM converts to IPV4 mapped IPV6.
Figure 2.29 Network Configuration for IPv4 Mapped IPv6