PLANET WGSW-52040 - Manual (Page 89)

3. Virtual cable test
Command Explanation
Admin Mode
virtual-cable-test interface ethernet Test virtual cables of the port.
7.3 Port Configuration Example
1/7 Switch 1
1/9
1/10
1/12 Switch 2 1/8
Switch 3
Figure 7-1: Port Configuration Example
No VLAN has been configured in the switches, default VLAN1 is used.
Switch Port Property
Switch1 1/7 Ingress bandwidth limit: 50 M
Switch2 1/8 Mirror source port
1/9 100Mbps full, mirror source port
1/10 1000Mbps full, mirror destination port
Switch3 1/12 100Mbps full
The configurations are listed below:
Switch1:
Switch1(config)#interface ethernet 1/7
Switch1(Config-If-Ethernet1/7)#bandwidth control 50000 receive
7-11