PLANET WGSW-52040 - Manual (Page 124)

3. Configure remote failure
Command Explanation
Port mode
ethernet-oam remote-failure
no ethernet-oam remote-failure
Enable remote failure detection of
EFM OAM (failure means
critical-event or link-fault event of the
local), no command disables the
function. (optional)
ethernet-oam errored-symbol-period
threshold high {high-symbols | none}
no ethernet-oam errored-symbol-period
threshold high
Configure the high threshold of
errored symbol period event, no
command restores the default value.
(optional)
ethernet-oam errored-frame-period threshold
high {high-frames | none}
no ethernet-oam errored-frame-period
threshold high
Configure the high threshold of
errored frame period event, no
command restores the default value.
(optional)
ethernet-oam errored-frame threshold high
{high-frames | none}
no ethernet-oam errored-frame threshold high
Configure the high threshold of
errored frame event, no command
restores the default value. (optional)
ethernet-oam errored-frame-seconds
threshold high {high-frame-seconds | none}
no ethernet-oam errored-frame-seconds
threshold high
Configure the high threshold of
errored frame seconds event, no
command restores the default value.
(optional)
14-46