PLANET WGSW-52040 - Manual (Page 470)

60-41
60.2 RSPAN Configuration Task List
1. Configure RSPAN VLAN
2. Configure mirror source port（cpu）
3. Configure mirror destination port
4. Configure reflector port
5. Configure remote VLAN of mirror group
1. Configure RSPAN VLAN
Command Explanation
VLAN Configuration Mode
remote-span
no remote-span
To configure the specified VLAN as RSPAN
VLAN. The no command will remove the
configuration of RSPAN VLAN.
2. Configure mirror source port(CPU)
Command Explanation
Global Mode
monitor session source
{interface | cpu [slot
]} {rx| tx| both}
no monitor session source
{interface | cpu [slot
]}
To configure mirror source port; The no
command deletes the mirror source port.
3. Configure mirror destination port
Command Explanation
Global Mode
monitor session destination
interface
no monitor session
destination interface
To configure mirror destination interface; The
no command deletes the mirror destination
port.
4. Configure reflector port