PLANET WGSW-52040 - Manual (Page 465)

59-36
port value and deletes the IP address.
2. Configure the sFlow proxy address
Command Explanation
Global Mode
sflow agent-address
no sflow agent-address
Configure the source IP address applied by
the sFlow proxy; the “no” form of the
command deletes this address.
3. Configure the sFlow proxy priority
Command Explanation
Global Mode
sflow priority
no sflow priority
Configure the priority when sFlow receives
packet from the hardware; the “no sflow
priority” command restores to the default
4. Configure the packet head length copied by sFlow
Command Explanation
Port Mode
sflow header-len
no sflow header-len
Configure the length of the packet data head
copied in the sFlow data sampling; the “no”
form of this command restores to the default
value.
5. Configure the max data head length of the sFlow packet
Command Explanation
Port Mode
sflow data-len
no sflow data-len
Configure the max length of the data packet in
sFlow; the “no” form of this command restores
to the default.
6. Configure the sampling rate value
Command Explanation
Port Mode
sflow rate {input | output
}
Configure the sampling rate when sFlow
performing hardware sampling. The “no”