PLANET WGSW-52040 - Manual (Page 173)

priority
no mac-vlan {mac |all}
the MAC address and the VLAN, namely
specified MAC address join/leave
specified VLAN.
4. Configure the IP-subnet-based VLAN function on the port
Command Explanation
Port Mode
switchport subnet-vlan enable
no switchport subnet-vlan enable
Enable/disable the port IP-subnet-base
VLAN function on the port.
5. Configure the correspondence between the IP subnet and the VLAN
Command Explanation
Global Mode
subnet-vlan ip-address
mask vlan
priority
no subnet-vlan {ip-address
mask |all}
Add/delete the correspondence between
the IP subnet and the VLAN, namely
specified IP subnet joins/leaves specified
VLAN.
6. Configure the correspondence between the Protocols and the VLAN
Command Explanation
Global Mode
protocol-vlan mode {ethernetii etype
|llc {dsap ssap
}|snap etype } vlan
priority
no protocol-vlan {mode {ethernetii etype
|llc {dsap ssap
}|snap etype }|all}
Add/delete the correspondence between
the Protocols and the VLAN, namely
specified protocol joins/leaves specified
VLAN.
20-95