PLANET WGSW-52040 - Manual (Page 256)

next-server
[[[…
]]]
no next-server
[[[…
]]]
Configure the address of the server hosting
file for importing. The no command deletes
the address of the server hosting file for
importing.
option {ascii | hex
| ipaddress }
no option
Configure the network parameter specified
by the option code. The no command
deletes the network parameter specified by
the option code.
lease { days [hours][minutes] | infinite }
no lease
Configure the lease period allocated to
addresses in the address pool. The no
command deletes the lease period allocated
to addresses in the address pool.
max-lease-time {[<days>] [<hours>]
[<minutes>] | infinite}
no max-lease-time
Set the maximum lease time for the
addresses in the address pool; the no
command restores the default setting.
Global Mode
ip dhcp excluded-address
[]
no ip dhcp excluded-address
[]
Exclude the addresses in the address pool
that are not for dynamic allocation.
(3) Configure manual DHCP address pool parameters
Command Explanation
DHCP Address Pool Mode
hardware-address
[{Ethernet | IEEE802|}]
no hardware-address
Specify/delete the hardware address
when assigning address manually.
host
]
no host
Specify/delete the IP address to be
assigned to the specified client when
binding address manually.
client-identifier
no client-identifier
Specify/delete the unique ID of the user
when binding address manually.
3. Enable logging for address conflicts
31-35