PLANET WGSW-52040 - Manual (Page 152)

11. Specify internal VLAN ID
1. Create or delete VLAN
Command Explanation
Global Mode
vlan WORD
no vlan WORD
Create/delete VLAN or enter VLAN Mode
2. Set or delete VLAN name
Command Explanation
VLAN Mode
name
no name
Set or delete VLAN name.
3. Assigning Switch ports for VLAN
Command Explanation
VLAN Mode
switchport interface <interface-list>
no switchport interface <interface-list>
Assign Switch ports to VLAN.
4. Set the Switch Port Type
Command Explanation
Port Mode
switchport mode {trunk | access | hybrid}
Set the current port as Trunk, Access or
Hybrid port.
5. Set Trunk port
Command Explanation
Port Mode
20-74