PLANET WGSW-52040 - Manual (Page 399)

radius-server timeout
no radius-server timeout
To configure the timeout value for the
RADIUS server. The no form of this
command will restore the default
configuration.
radius-server accounting-interim-update
timeout
no radius-server
accounting-interim-update timeout
To configure the update interval for
accounting. The no form of this command
will restore the default configuration.
5. Configure the IP address of the RADIUS NAS
Command Explanation
Global Mode
radius nas-ipv4
no radius nas-ipv4
To configure the source IP address for the
RADIUS packets for the switch.
radius nas-ipv6
no radius nas-ipv6
To configure the source IPv6 address for
the RADIUS packets for the switch.
47.3 RADIUS Typical Examples
47.3.1 IPv4 Radius Example
10.1.1.2
10.1.1.1 Radius Server
10.1.1.3
Figure 47-2: The Topology of IEEE802.1x configuration
A computer connects to a switch, of which the IP address is 10.1.1.2 and connected with a
47-178