beautypg.com

2 forward or filter, 2 forward or filter -108 – PLANET WGSW-52040 User Manual

Page 186

background image

is the default aging time for MAC address entry in switch. Aging time can be modified in

switch.

21.1.2 Forward or Filter

The switch will forward or filter received data frames according to the MAC table. Take the

above figure as an example, assuming switch have learnt the MAC address of PC1 and PC3,

and the user manually configured the mapping relationship for PC2 and PC4 to ports. The

MAC table of switch will be:

MAC Address

Port number

Entry added by

00-01-11-11-11-11 1/5

Dynamic learning

00-01-22-22-22-22 1/5

Static configuration

00-01-33-33-33-33 1/12

Dynamic learning

00-01-44-44-44-44 1/12

Static configuration

1. Forward data according to the MAC table

If PC1 sends a message to PC3, the switch will forward the data received on port 1/5 from

port1/12.

2. Filter data according to the MAC table

If PC1 sends a message to PC2, the switch, on checking the MAC table, will find PC2 and PC1

are in the same physical segment and filter the message (i.e. drop this message).

Three types of frames can be forwarded by the switch:

Broadcast

frame

Multicast

frame

Unicast

frame

The following describes how the switch deals with all the three types of frames:

1. Broadcast frame: The switch can segregate collision domains but not broadcast

domains. If no VLAN is set, all devices connected to the switch are in the same

broadcast domain. When the switch receives a broadcast frame, it forwards the frame

in all ports. When VLANs are configured in the switch, the MAC table will be adapted

accordingly to add VLAN information. In this case, the switch will not forward the

received broadcast frames in all ports, but forward the frames in all ports in the same

VLAN.

2. Multicast frame: For the unknown multicast, the switch will broadcast it in the same

vlan, but the switch only forwards the multicast frames to the multicast group’s port if

IGMP Snooping function or the static multicast group has been configured.

3. Unicast frame: When no VLAN is configured, if the destination MAC addresses are in

21-108