PLANET WGSW-52040 - Manual (Page 393)

tacacs-server authentication host
<ip-address> [port <port-number>]
[timeout ] [key {0 | 7}
] [primary]
no tacacs-server authentication host
<ip-address>
Configure the IP address, listening port
number, the value of timeout timer and the
key string of the TACACS+ server; the no
form of this command deletes the
TACACS+ authentication server.
3. Configure the TACACS+ authentication timeout time
Command Explanation
Global Mode
tacacs-server timeout
no tacacs-server timeout
Configure the authentication timeout for the
TACACS+ server, the “no tacacs-server
timeout” command restores the default
configuration.
4. Configure the IP address of the TACACS+ NAS
Command Explanation
Global Mode
tacacs-server nas-ipv4
no tacacs-server nas-ipv4
To configure the source IP address for the
TACACS+ packets for the switch.
46.3 TACACS+ Scenarios Typical Examples
10.1.1.2
10.1.1.1 Tacacs Server
10.1.1.3
Figure 46-1: TACACS Configuration
46-172