PLANET WGSW-52040 - Manual (Page 288)

command disables it.
ipv6 dhcp relay subscriber-id option
no ipv6 dhcp relay subscriber-id option
This command enables the
switch relay to support the
option 38, the no form of this
command disables it.
ipv6 dhcp relay remote-id delimiter WORD
no ipv6 dhcp relay remote-id delimiter
Configures user configuration
options to generate remote-id.
The no command restores to
its original default
configuration, i.e. enterprise
number together with vlan
MAC.
ipv6 dhcp relay subscriber-id select (sp | sv | pv |
spv) delimiter WORD (delimiter WORD |)
no ipv6 dhcp relay subscriber-id select delimiter
Configures user configuration
options to generate
subscriber-id. The no
command restores to its
original default configuration,
i.e. vlan name together with
port name.
Layer3 Interface configuration mode
ipv6 dhcp relay remote-id
no ipv6 dhcp relay remote-id
This command is used to set
the form of adding option 37 in
received DHCPv6 request
packets, of which
is the content of remote-id in
user-defined option 37 and it is
a string with a length of less
than 128. The no operation
restores remote-id in option 37
to enterprise-number together
with vlan MAC address.
ipv6 dhcp relay subscriber-id
no ipv6 dhcp relay subscriber-id
This command is used to set
the form of adding option 38 in
received DHCPv6 request
packets, of which
is the content
of subscriber-id in user-defined
option 38 and it is a string with
35-67