PLANET WGSW-52040 - Manual (Page 108)

12. Display and debug the relative information of LLDP
Command Explanation
Admin, Global Mode
show lldp
Display the current LLDP configuration
information.
show lldp interface ethernet
Display the LLDP configuration
information of the current port.
show lldp traffic
Display the information of all kinds of
counters.
show lldp neighbors interface
ethernet < IFNAME >
Display the information of LLDP
neighbors of the current port.
show debugging lldp
Display all ports with LLDP debug
enabled.
Admin Mode
debug lldp
no debug lldp
Enable or disable the DEBUG switch.
debug lldp packets interface ethernet
<IFNAME>
no debug lldp packets interface ethernet
Enable or disable the DEBUG
packet-receiving and sending function in
port or global mode.
Port configuration mode
clear lldp remote-table Clear Remote-table of the port.
11.3 LLDP Function Typical Example
11-30