PLANET WGSW-52040 - Manual (Page 289)

a length of less than 128. The
no operation restores
subscriber-id in option 38 to
vlan name together with port
name such as
"Vlan2+Ethernet1/2".
3. Dhcpv6 server option basic functions configuration
Command Description
Global mode
ipv6 dhcp server remote-id option
no ipv6 dhcp server remote-id option
This command enables
DHCPv6 server to support the
identification of option 37, the
no form of this command
disables it.
ipv6 dhcp server subscriber-id option
no ipv6 dhcp server subscriber-id option
This command enables
DHCPv6 server to support the
identification of option 38, the
no form of this command
disables it.
ipv6 dhcp use class
no ipv6 dhcp use class
This command enables
DHCPv6 server to support the
using of DHCPv6 class during
address assignment, the no
form of this command disables
it without removing the relative
DHCPv6 class information that
has been configured.
ipv6 dhcp class
no ipv6 dhcp class
This command defines a
DHCPv6 class and enters
DHCPv6 class mode, the no
form of this command removes
this DHCPv6 class.
Interface configuration mode
ipv6 dhcp server select relay-forw
no ipv6 dhcp server select relay-forw
This command enables the
DHCPv6 server to support
selections when multiple
35-68