PLANET WGSW-52040 - Manual (Page 265)

2. To configure DHCPv6 address pool
（ 1） To achieve/delete DHCPv6 address pool
（ 2） To configure parameter of DHCPv6 address pool
3. To enable DHCPv6 server function on port
1. To enable/disable DHCPv6 service
Command Explanation
Global Mode
service dhcpv6
no service dhcpv6
To enable DHCPv6 service.
2. To configure DHCPv6 address pool
（ 1）To achieve/delete DHCPv6 address pool
Command Explanation
Global Mode
ipv6 dhcp pool <poolname>
no ipv6 dhcp pool <poolname>
To configure DHCPv6 address pool.
（ 2）To configure parameter of DHCPv6 address pool
Command Explanation
DHCPv6 address pool Configuration
Mode
network-address
<ipv6-pool-start-address>
{<ipv6-pool-end-address> |
<prefix-length>} [eui-64]
no network-address
To configure the range of IPv6 address
assignable of address pool.
dns-server
no dns-server
To configure DNS server address for
DHCPv6 client.
domain-name
no domain-name
To configure DHCPv6 client domain name.
excluded-address
no excluded-address
To exclude IPv6 address which isn’t used for
dynamic assignment in address pool.
32-44