PLANET WGSW-52040 - Manual (Page 69)

（ 2） Configure TFTP server connection idle time
（ 3） Configure retransmission times before timeout for packets without
acknowledgement
（ 4） Shut down TFTP server
1. FTP/TFTP client configuration
（ 1）FTP/TFTP client upload/download file
Command Explanation
Admin Mode
copy
[ascii | binary]
FTP/TFTP client upload/download file.
（ 2）For FTP client, server file list can be checked.
Admin Mode
ftp-dir
For FTP client, server file list can be
checked. FtpServerUrl format looks like: ftp:
//user: password@IPv4|IPv6 Address.
2. FTP server configuration
（ 1）Start FTP server
Command Explanation
Global Mode
ftp-server enable
no ftp-server enable
Start FTP server, the no command shuts down
FTP server and prevents FTP user from logging
in.
（ 2）Configure FTP login username and password
Command Explanation
Global Mode
ip ftp username
password [0 | 7] <password>
no ip ftp username<username>
Configure FTP login username and password;
this no command will delete the username and
password.
（ 3）Modify FTP server connection idle time
4-22