PLANET WGSW-52040 - Manual (Page 241)

4. Configure trusted IP
Command Explanation
Global configuration mode
anti-arpscan trust ip
[]
no anti-arpscan trust ip
[]
Set the trust attributes of IP.
5. Configure automatic recovery time
Command Explanation
Global configuration mode
anti-arpscan recovery enable
no anti-arpscan recovery enable
Enable or disable the automatic
recovery function.
anti-arpscan recovery time
no anti-arpscan recovery time
Set automatic recovery time.
6. Display relative information of debug information and ARP scanning
Command Explanation
Global configuration mode
anti-arpscan log enable
no anti-arpscan log enable
Enable or disable the log function of ARP
scanning prevention.
anti-arpscan trap enable
no anti-arpscan trap enable
Enable or disable the SNMP Trap function
of ARP scanning prevention.
show anti-arpscan [trust
supertrust-port> | prohibited ]
Display the state of operation and
configuration of ARP scanning prevention.
Admin Mode
debug anti-arpscan
no debug anti-arpscan
Enable or disable the debug switch of ARP
scanning prevention.
27-20