PLANET WGSW-52040 - Manual (Page 451)

56-22
56.2 ULPP Configuration Task List
1. Create ULPP group globally
2. Configure ULPP group
3. Show and debug the relating information of ULPP
1. Create ULPP group globally
Command Expalnation
Global mode
ulpp group
no ulpp group
Configure and delete ULPP group
globally.
2. Configure ULPP group
Command Explanation
ULPP group configuration mode
preemption mode
no preemption mode
Configure the preemption mode of
ULPP group. The no operation
deletes the preemption mode.
preemption delay
no preemption delay
Configure the preemption delay, the
no operation restores the default
value 30s.
control vlan
no control vlan
Configure the sending control VLAN,
no operation restores the default
value 1.
protect vlan-reference-instance
no protect vlan-reference-instance
Configure the protection VLANs, the
no operation deletes the protection
VLANs.
flush enable mac
flush disable mac
Enable or disable sending the flush
packets which update MAC address.
flush enable arp
flush disable arp
Enable or disable sending the flush
packets which delete ARP.
flush enable mac-vlan
flush disable mac-vlan
Enable or disable sending the flush
packets of deleting the dynamic
unicast mac according to vlan.