4 web portal authentication troubleshooting, Ortal, Uthentication – PLANET WGSW-52040 User Manual
Page 429: Roubleshooting

52-208
Switch(config)#interface vlan 1
Switch(config-if-vlan1)#ip address 192.168.40.50 255.255.255.0
Switch(config)#webportal enable
Switch(config)#webportal nas-ip 192.168.40.50
Switch(config)#webportal redirect 192.168.40.99
Switch(config)#interface ethernet 1/3
Switch(config-if-ethernet1/3)#webportal enable
Web portal authentication associates with DHCP snooping binding to use, the configuration is
as follows:
Switch(config)#ip dhcp snooping enable
Switch(config)#ip dhcp snooping binding enable
Switch(config)#interface ethernet 1/2
Switch(config-if-ethernet1/2)#webportal enable
Switch(config-if-ethernet1/2)#ip dhcp snooping binding webportal
52.4 Web Portal Authentication Troubleshooting
When using web portal authentication, the system will show the detailed prompt information if
the operation is wrong.
Web portal authentication is disabled by default. After ensure the configuration is correct, use
debug command and show command to check the relative information, if you can not
determine the cause of the problem, please send the recorded message to technical server
center of our company.