PLANET WGSW-52040 - Manual (Page 60)

{|}]
7. Configure view
Command Explanation
Global Mode
snmp-server view
{include|exclude}
no snmp-server view
[]
Configure view on the switch. This command
is used for SNMP v3.
8. Configuring TRAP
Command Explanation
Global Mode
snmp-server enable traps
no snmp-server enable traps
Enable the switch to send Trap message.
This command is used for SNMP v1/v2/v3.
snmp-server host { |
} {v1 | v2c | {v3
{noauthnopriv | authnopriv | authpriv}}}
no snmp-server host
{ |
} {v1 | v2c | {v3
{noauthnopriv | authnopriv | authpriv}}}
Set the host IPv4/IPv6 address which is used
to receive SNMP Trap information. For SNMP
v1/v2, this command also configures Trap
community string; for SNMP v3, this
command also configures Trap user name
and security level. The “no” form of this
command cancels this IPv4 or IPv6 address.
snmp-server trap-source {
| }
no snmp-server trap-source
{ | }
Set the source IPv4 or IPv6 address which is
used to send trap packet, the no command
deletes the configuration.
9. Enable/Disable RMON
Command Explanation
Global mode
rmon enable
no rmon enable
Enable/disable RMON.
4-13