PLANET WGSW-52040 - Manual (Page 107)

7. Configure the intervals of sending Trap messages
Command Explanation
Global Mode
lldp notification interval <seconds>
no lldp notification interval
Configure the intervals of sending
Trap messages as the specified value or
default value.
8. Configure to enable the Trap function of the port
Command Explanation
Port Configuration Mode
lldp trap <enable|disable>
Enable or disable the Trap function of
the port.
9. Configure the optional information-sending attribute of the port
Command Explanation
Port Configuration Mode
lldp transmit optional tlv [portDesc]
[sysName] [sysDesc] [sysCap]
no lldp transmit optional tlv
Configure the optional
information-sending attribute of the port
as the option value of default values.
10. Configure the size of space to store Remote Table of the port
Command Explanation
Port Configuration Mode
lldp neighbors max-num < value >
no lldp neighbors max-num
Configure the size of space to store
Remote Table of the port as the
specified value or default value.
11. Configure the type of operation when the Remote Table of the port is full
Command Explanation
Port Configuration Mode
lldp tooManyNeighbors {discard |
delete}
Configure the type of operation when the
Remote Table of the port is full.
11-29