PLANET WGSW-52040 - Manual (Page 452)

56-23
3. Show
and
debug the relating information of ULPP
Command Explanation
Admin mode
show ulpp group [group-id]
Show the configuration information of the
configured ULPP group.
show ulpp flush counter interface
{ethernet | }
Show the statistic information of the flush
packets.
show ulpp flush-receive-port
Show flush type and control VLAN received
by the port.
clear ulpp flush counter interface Clear the statistic information of the flush
packets.
debug ulpp flush {send | receive}
interface
no debug ulpp flush {send | receive}
interface
Show the information of the receiving and
sending flush packets, the no operation
disables the shown information.
debug ulpp flush content interface
no debug ulpp flush content interface
Show the contents of the received flush
packets, the no operation disables the
showing.
description
no description
Configure or delete ULPP group
description.
Port mode
ulpp control vlan
no ulpp control vlan
Configure the receiving control
VLANs, no operation restores the
default value 1.
ulpp flush enable mac
ulpp flush disable mac
Enable or disable receiving the flush
packets which update the MAC
address.
ulpp flush enable arp
ulpp flush disable arp
Enable or disable receiving the flush
packets which delete ARP.
ulpp flush enable mac-vlan
ulpp flush disable mac-vlan
Enable or disable receiving the flush
packets of mac-vlan type.
ulpp group master
no ulpp group master
Configure or delete the master port
of ULPP group.
ulpp group slave
no ulpp group slave
Configure or delete the slave port of
ULPP group.