PLANET WGSW-52040 - Manual (Page 106)

2. Configure the port-base LLDP function switch
Command Explanation
Port Mode
lldp enable
lldp disable
Configure the port-base LLDP function
switch.
3. Configure the operating state of port LLDP
Command Explanation
Port Mode
lldp mode (send|receive|both|disable)
Configure the operating state of port
LLDP.
4. Configure the intervals of LLDP updating messages
Command Explanation
Global Mode
lldp tx-interval
no lldp tx-interval
Configure the intervals of LLDP updating
messages as the specified value or
default value.
5. Configure the aging time multiplier of LLDP messages
Command Explanation
Global Mode
lldp msgTxHold >
no lldp msgTxHold
Configure the aging time multiplier of
LLDP messages as the specified value or
default value.
6. Configure the sending delay of updating messages
Command Explanation
Global Mode
lldp transmit delay <seconds>
no lldp transmit delay
Configure the sending delay of updating
messages as the specified value or
default value.
11-28